Car Battery Recondition

Car Battery Recondition

Car Battery is among the most costly equipment you’d wish to remain in a better state for a lengthy period. A replacement of a bad battery could increase your expenses rapidly. It can be avoided if you have an efficient car battery recondition solution. To have a car battery that doesn’t hold a charge for a long time can turn out to be frustrating. Since car batteries are made of lead and acid, and then a chemical reaction is generated through the acid. The process produces a charge. Car battery reconditioning can be done at home, or you can visit your local repair shop. In the end, batteries tend to get worn out and require replacement after a couple of years.

What Do You Need To Know About Reconditioning a Car Battery?

If you choose to recondition your car battery at home, it can save you a lot of money. Reconditioning the battery increases the functionality of your battery. This ensures that the battery won’t require replacement, as often instead, you will have a more efficient performance with it. So before you end up doing it yourself, you must follow all the procedural steps to avoid making a mistake. A mistake can lead you to purchase a new battery.

Batteries made out of lead and acid, and gel can be easily reconditioned. So, a chemical charge is generated through the acid, but corrosion due to sulphur on the battery plates is inevitable. That is one of the reasons that you can restore the battery up-to five times until it finally dies down. It’s important to check the functionality of the battery with a voltmeter, it should read either 10 or 12 volts. If the battery reads below 10 volts, then it can’t be reconditioned.

Reconditioning a Car Battery

car batteryIf you are reconditioning your car battery at home, then there are equipment’s you should have on you before doing it.

  • ¼ quarts of Distilled Water

  • Epsom Salt (Magnesium Sulphate)

  • Plastic Funnel

  • Battery Charger

  • Goggles

  • Rubber Gloves

  • Screwdriver

  • Baking Soda

  1. The first step to recondition your car battery is to remove corrosion. You can do this by mixing 2tsp baking soda in 1tbsp in the water until it turns into a paste. Then, with the help of a toothbrush, vigorously rub it on the post.

  2. After heating the distilled water, pour in the Epsom salt until it dissolves in the water. Then, the next step would be draining all the water in the battery.

  3. Pour the mixture of Epsom Salt inside the battery, and then insert the battery caps in place.

  4. With the help of the trickle charger, you can restore it to start the car.

Conclusion

Reconditioning your car at home can curb your expenses. It includes following the correct steps and taking all the precautions to avoid damaging the battery. For instance, battery acid can be harmful, so it’s important to dispose of the liquid properly.

wpx_orb

Leave a Reply

Your email address will not be published. Required fields are marked *