Battery Reconditioning Kit

Battery Reconditioning Kit

bike battery reconCar Batteries can be reconditioned can be done at home. There are certain procedural step that you must follow to recondition your battery without damaging it. The usage of car batteries is up to five years, but it can be prolonged for over ten years. Usually, the batteries tend to become inefficient, as they don’t hold charge. Reconditioning can make increase its functionality with a few steps. Reconditioned batteries helps to restore and upgrade the functionality of your battery. They provide you with enough charge and saves your time and money. And it is eco-friendly, because the battery liquid is harmful if it is drained on the ground. Reconditioning a car battery requires only effort and the right equipment.

Car Battery Recondition

Car batteries are made of lead and acid, and then a chemical reaction is generated through the acid. The process produces a charge. Lithium Ion battery, Nickel Metal Hydride battery, Lead Acid Battery, AGM and Gel Type of Battery are easily rechargeable. Batteries made of nickel or NiCad can die out quickly even after they are reconditioned. Lead Acid battery is the easiest car battery to recondition. Because they can reconditioned with the solution of Epsom salt in distilled water.

Battery Reconditioning Kit

So, if you’re looking for ways to recondition your battery, then there are some steps that need to be followed. All you require is to put in some effort and have the require equipment. So the reconditioning kit would include:

  • Distilled Water

  • Epsom Salt (Magnesium Sulphate)

  • Plastic Funnel

  • Battery Charger

  • Goggles

  • Rubber Gloves

  • Screwdriver

  • Baking Soda

  • Plastic Buckets

  • Voltmeter

It is important to know what kind of battery you have, and what the tools you require are. After you have purchased the reconditioning kit, you can recharge the battery at home in these simple steps.

  1. The first step is wear rubber gloves and clean the terminals off the battery. Because there can be a lot of corrosion on the battery surface that you should remove before reconditioning. . You can do this by mixing 2tsp baking soda in 1tbsp in the water until it turns into a paste. Then, with the help of a toothbrush, vigorously rub it on the post.
  2. Then, you should check the voltage of the battery with a voltmeter. Voltmeter aren’t hard to come by, and they can help you deter the volts of the battery. If the voltage is below 10, then your battery needs replacing.

  3. Empty the battery liquid into the plastic bucket to avoid spilling on the ground. After opening the caps with a screwdriver, pour the baking soda solution into the drained acid to neutralize it.

  4. After heating the distilled water, pour in the Epsom salt until it dissolves in the water. This ensures the battery is cleaned from the inside.

  5. With the help off the battery charge make sure to test it after pouring the electrolyte solution into cells.


Having the tools for checking the car battery can be beneficial. Things like hydrometer, battery multi meter, and voltmeter can help recondition your car.


Leave a Reply

Your email address will not be published. Required fields are marked *